(1) bed body
The whole welded structure of steel plate is adopted, and a closed frame is composed of left and right columns, worktables, angle iron connecting beams and tie rods, to ensure that the shearing machine has enough strength and system.The upper end of the left and right column each has a lifting hole, the leveling screw and the foundation bolt hole are located at the foot end of the column for installation, the upper inside of the left and right column with two eccentric bolts hanging the left and right guide rail seat, to provide guidance for the tool rest movement, the guide rail seat can swing back and forth, make it possible to adjust the blade gap, adjust the blade gap of the two handles are installed in the left after standing, can realize the gap fast adjustment.
A horizontal iron plate under the bed for mounting the motor.
(2) tool rest:The tool rest is welded steel plate structure, it is connected with the main shaft through the pin shaft, connecting rod, eccentric wheel, the tool rest is equipped with a blade made of alloy tool steel with four edge, after quenching and fine grinding, hardness mrc55-57, the blade is fixed with countersunk screw, the tool rest back edge is adjusted with the top screw, so that the blade clearance uniformity is better.
Main uses:For the linear shear of sheet material, metal materials should be low carbon steel, tensile strength limit is less than 450n/m, non-metallic materials including rubber, plastic, hot shear plate temperature at 50c, the machine at full load can only make intermittent shear, if the scissors tensile strength limit of the sheet material, shear thickness should be reduced.
This machine is suitable for general machinery, motor, electrical appliances, automobiles, light industry and other industries of all sheet metal processing workshop.

Main features:
1. Machine bed is welded with steel plate as a whole. The machine has compact structure, light weight and good rigidity.
2. The movement path of the tool rest tilts forward to the vertical supporting surface of the lower blade, and a better shear section can be obtained. The upper blade can be adjusted by jacking up the screw j, so that the cutting edge burr is reduced to a minimum degree.
3, the press device uses the butterfly spring, the press foot has the non-slip pad, the press force is larger, and will not damage the surface of the plate.
4, the machine is completely independent closed gear box, directly mounted on the spindle for rotation, compact structure, good gear lubrication, low noise, long life.
5. This machine tool has no clutch and flywheel, and directly uses electromagnetic brake motor to drive the shear, which reduces the idle running time of the motor and saves energy to a certain extent.
6. The front and rear stoppers of this machine have scale display size, and the rear stoppers can be adjusted synchronously, easy to operate.

The company owns jiangsu yinli cnc machine tool co., ltd., nantong huade forging machine tool co., ltd., mainly engaged in the research, development and manufacture of cnc/ordinary plate shearing machine, bending machine, plate winding machine, press and other high-quality plate processing machinery. "yinli" series products are widely used in aviation, automobiles, ships, agricultural machinery, electrical appliances, instruments, medical instruments, hardware processing and other production and processing fields.
The company's products are exported to more than 20 countries in southeast asia, europe and america, with an annual output value of more than 400 million yuan, among which the annual export amount of more than 80 million yuan. The company's products have established themselves in the international and domestic markets, and have been recognized and praised by all walks of life with high cost performance and quality service.
The group has established close technical cooperation relations with jiangsu university, national casting and forging institute and singapore science and technology company, and has strong strength in the development of high-tech products. Yinli brand products have been awarded china famous trademark and jiangsu famous trademark. The group has become a national contract-abiding and creditworthy enterprise, a national high-tech enterprise, a private science and technology enterprise in jiangsu, and a credit aaa enterprise. And has a number of high-tech products, the company has a number of national invention patents.
Group company will continue to adhere to the "first-class management, first-class technology, first-class service" business philosophy, dedicated to provide customers with first-class products and satisfactory service.

Yuan lu

mangatalu@outlook.com

Online Store——Buy Now